Signs You May Need a New Well Pump

Is your well pump underperforming or simply not working in Monroe, NC? It might be time for you to get a new one. After all, if your well pump goes out completely, you’ll be without fresh running water until a new one can be installed. To that end, it’s smart to know the warning signs, so you can schedule your replacement at a convenient time.

As always, the key to keeping your well pump operating smoothly, for as long as possible, is to schedule routine preventative maintenance. Your well pump is just like any other appliance—it needs to be taken care of, or it may suddenly quit working.

Here are the warning signs to watch out for:

• Dirty water: Is your water dirty, cloudy or even muddy? That’s a sign that your well pump is having trouble filtering the water of sand, silt and mud before it pumps it up into your home. The friction from the sand or silt will cause your pump to wear out at a rapid pace.
• Low water pressure: Low water pressure is another obvious sign that it’s time to service or replace your well pump. Often the pump is clogged by mineral buildup. This issue may be solved by cleaning and flushing the pump, but in some cases, the water itself is corrosive to the metal pump parts. Alternatively, the problem may be that your water table is too low and there’s not enough water to pump into your home.
• Constantly running pump: This is an indication that your pump is struggling to draw water from the well into your home. However, this may also be caused by a low water supply, so be sure to rule that out before you decide to replace your pump.
• No water at all: The most alarming sign your pump has gone out is that there’s no water when you turn on the tap. This could be because the water table is low. However, the pump may also be out. If the water level gets too low, the pump may continue to run, eventually burning itself out.
• Strange noises: Your pump and tank shouldn’t make clicking or thumping noises. If you notice this happening, it may be because the pressure tank is full of air. Should you notice any strange noises, have your well pump contractor come out and inspect your pump.
• Spitting faucets: Spitting faucets are caused by air in the plumbing. The pressure tank may be malfunctioning, or there may be cracks in the pipes. If those don’t seem to be the issue, there could be an issue with your well pump.

Whenever you notice these signs that you need a new well pump in Monroe, NC, get in touch with your well contractor right away. The sooner you catch the problem, the less likely you’ll be to find out there’s no running water when you need it most.

For well pumps and services, reach out to the team at Love Well & Pump Supply, LLC today.

Categorised in: Well Pump Installation

This post was written by Writer